Honeycomb core, bonded flat铝蜂窝芯复合
0.8–1.5 mm skins either side of an aluminium honeycomb core, bonded with structural adhesive and pressed flat under heat.上下 0.8–1.5mm 铝面板夹铝蜂窝芯，结构胶热压复合，芯材六边形连续无接缝。
Aluminium Honeycomb Panel铝蜂窝复合板
6–50 mm honeycomb sandwich — mirror-flat large panels for canopies, soffits and ceilings6–50mm 铝蜂窝夹芯板，大板幅镜面平整，雨棚与吊顶首选
Product Overview产品概述
Made to Your Drawing按图定制
Two aluminium skins bonded to an aluminium honeycomb core under heat and pressure. Total thickness 6–50 mm, panels up to 1,500 × 6,000 mm, flatness within 0.5 mm/m. Sandwich stiffness means a 20 mm panel behaves like 4 mm solid aluminium at roughly half the weight — the usual answer for long soffits, wide canopies and ceilings where solid panels would oil-can. Faces can be PVDF, wood-grain, stone-look or mirror.上下铝面板与铝蜂窝芯经结构胶热压复合。总厚 6–50mm，最大板幅 1,500×6,000mm，平整度 ≤0.5mm/m。夹芯结构让 20mm 板达到约 4mm 纯铝板的刚度而重量减半，是长檐口、大跨度雨棚和大吊顶防止起浪的常规方案。饰面可做氟碳、木纹、石纹或镜面。
- Large canopies & soffits大跨度雨棚与檐底
- Interior ceilings and lifts室内吊顶与电梯厅
- Partitions and furniture隔断与家具台面
- Signage and fascia门头与招牌
| Parameter | 参数 | Specification | 规格 |
|---|---|---|---|
| Skin | 面板材质 | AA3003 / AA5005, 0.8–1.5 mmAA3003 / AA5005，0.8–1.5mm | |
| Core | 芯材 | Aluminium honeycomb, 5–25 mm cell铝蜂窝芯，芯格 5–25mm | |
| Total thickness | 总厚度 | 6 / 10 / 15 / 20 / 25 / 30 / 50 mm6 / 10 / 15 / 20 / 25 / 30 / 50 mm | |
| Max panel size | 最大板幅 | 1,500 × 6,000 mm1,500 × 6,000 mm | |
| Flatness | 平整度 | ≤ 0.5 mm/m≤ 0.5mm/m | |
| Finish | 表面处理 | PVDF / polyester / wood-grain / stone-look氟碳 / 聚酯 / 木纹 / 石纹 | |
| Weight | 自重 | ≈ 8 kg/m² at 20 mm20mm 约 8kg/m² |
Gallery样板与实拍
Finish Samples & Production Photos样板图与生产实拍
White-background samples show the real finish and profile; site photos show the same product installed.白底样板图看工艺与型材，实拍图看装到工程上的效果。
Build details工艺细节
What you actually receive做出来是什么样
Four points our engineers check on every order — the difference between a flat panel and a facade that stays flat.每个订单我们都会盯的四件事——决定一块板能不能长期平整的关键。
Flatness ≤ 0.5 mm/m平整度 ≤ 0.5mm/m
Sandwich stiffness keeps large panels dead flat — the reason it is used for long soffits, canopies and interior ceilings.夹芯刚度让大板幅保持镜面平整，长檐口、雨棚底与大吊顶不掉角、不起浪。
Light but stiff轻质高刚
A 20 mm panel weighs about 8 kg/m² while matching the rigidity of 4 mm solid aluminium — lighter steel structure, easier install.20mm 板约 8kg/m²，刚度相当于 4mm 纯铝板，减轻龙骨与主体钢结构荷载。
Openings reinforced开孔加固
Downlights, sprinklers and fixings are cut in the factory with aluminium inserts bonded around each opening — no site drilling.灯孔、喷淋、挂点出厂数控开孔，孔周预埋铝衬套加固，现场免开孔。
Send your drawing, get a price in 24h发图纸，24小时内报价
DWG / PDF / sketch all acceptable. Shop drawing service available.支持 DWG / PDF / 草图，可提供深化图服务。